石油钻井技术
全新正版 极速发货
￥ 61.53 6.3折 ￥ 98 全新
库存4件
广东广州
认证卖家担保交易快速发货售后保障
作者高长虹
出版社科学出版社
ISBN9787030537607
出版时间2017-09
装帧平装
开本其他
定价98元
货号1201533398
上书时间2024-06-18
商品详情
- 品相描述：全新
- 商品描述
-
作者简介
Changhong Gao received his degrees in petroleum engineering from China University of Petroleum, University of Tulsa and Curtin University. He worked for Sinopec as a field engineer and research engineer. He also taught at United Arab Emirates University, University of Aberdeen and Petroleum Institute of Abu Dhabi.
In 2013, he was elected Taishan Scholar by Shandong province government, as well as Yellow River Delta Scholar by Dongying city government. His teaching and research interests include drilling mud, production system design and enhanced oil recovery. He has published more than 30 journal papers and presented a few papers at SPE and APPEA conferences.
目录
Preface
Chapter 1 Drilling systems
1.1 Hoisting system
1.1.1 Draw-works and wire rope
1.1.2 Crown block and traveling block
1.2 Rotary system
1.2.1 Kelly and kelly bushing
1.2.2 Swivel
1.2.3 Drill pipe and drill collar
1.2.4 Drill bits
1.2.5 Other accessories on drill string
1.3 Mud circulation system
1.4 Solid control equipment
1.4.1 Shale shaker
1.4.2 Desander and desilter
1.5 Well control equipment
1.6 Efficiency of hoisting system
1.7 Top drive system
Chapter 2 Drilling mud
2.1 Types of drilling fluid
2.1.1 Water-based mud (WBM)
2.1.2 Oil-based mud (OBM)
2.1.3 Synthetic-based mud (SBM)
2.2 Mud density calculations
2.3 Basics of Newtonian and non-Newtonian fluid
2.4 Laminar flow of Bingham plastic fluid in pipe
2.5 Laminar flow of Bingham plastic fluid in annulus
2.6 Turbulent flow of mud in annulus
2.7 Flow through nozzles
2.8 Mud measurements
2.8.1 Mud density
2.8.2 Mud viscosity
2.8.3 Mud filtrate loss
2.8.4 Other measurements
Chapter 3 Casing design
3.1 Overburden stress
3.2 Pore pressure
3.3 Fracture pressure
3.4 Introduction to casing
3.5 Casing setting depth
3.6 Casing size selection
3.7 Casing grades selection
Chapter 4 Directional drilling
4.1 Reasons for drilling directional wells
4.2 Geometry of directional well
4.3 Deflection tools
4.4 Trajectory design
Chapter 5 Mud hydraulics
5.1 Flow rate capacity requirement
5.2 Pressure requirement
5.3 Mud hydraulics optimization
5.3.1 Maximum bit horsepower criterion
5.3.2 Maximum jet impact force criterion
5.3.3 Maximum nozzle velocity criterion
5.4 Discussions
Chapter 6 Underbalanced drilling
6.1 Benefits ofunderbalanced drilling
6.2 How to achieve underbalanced condition
6.3 Underbalanced drilling operations
6.4 Surface equipment for underbalanced drilling
Chapter 7 Cementing and perforation
7.1 Functions of cement
7.2 Selection of cement grades
7.3 Preparing the cement
7.4 Cementing the well
7.5 Well perforation
Chapter 8 Drilling problems and drilling costs
8.1 Stuck pipe
8.2 Shale sloughing
8.3 Lost circulation
8.4 Well kick
8.5 Drilling costs
8.5.1 Leases
8.5.2 Site preparation
8.5.3 Well drilling
8.5.4 Rig mobilization
8.5.5 Miscellaneous costs
Chapter 9 Properties of hydrocarbon and rock
9.1 Phase behavior
9.1.1 Oil reservoir
9.1.2 Gas reservoir
9.2 Properties of natural gas
9.2.1 Ideal gas law
9.2.2 Properties of real gas
9.2.3 Compressibility of gas
9.2.4 Gas formation volume factor
9.2.5 Gas viscosity
9.3 Properties of crude oil
9.3.1 Oil specific gravity
9.3.2 API gravity
9.3.3 Solution gas oil ratio
9.3.4 Oil formation volume factor
9.3.5 Oil viscosity
9.4 Basic rock properties
9.4.1 Porosity
9.4.2 Permeability
9.4.3 Electrical conductivity and resistivity
Main References
Appendix A
Appendix B
Appendix C
Appendix D
内容摘要
从事石油钻井工作的技术人员大学院校学生从事石油钻井工作的技术人员大学院校学生本书从旋转钻井系统和顶部钻井系统出发，进而阐述钻头工作原理，钻井液的功能和压降计算方法，套管设计方法，水平井技术，钻井技术难题等重点内容。不仅覆盖了传统钻井作业的所有重点技术，同时也包括了钻井技术的新进展，如顶部驱动技术和旋转导向技术。从钻井设备出发，循序渐进讲述了完整的钻井过程。
— 没有更多了 —
以下为对购买帮助不大的评价